100-101日本語模擬試験、300-135参考書

JapanCertのIT業界専門家チームは彼らの経験と知識を利用して絶えないな試験対策材料の品質を高めて、受験者の需要を満たして、受験者のはじめてCisco 100-101日本語模擬試験を順調に合格するを保証します。あなた達はJapanCertの商品を購入してもっともはやく正確に試験に関する情報を手に入れます。JapanCertの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。

我々の承諾だけでなく、お客様に最も全面的で最高のサービスを提供します。Ciscoの300-135参考書の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのCiscoの300-135参考書に一番信頼できるヘルプを提供します。Ciscoの300-135参考書に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。

試験番号：100-101日本語模擬試験
試験科目：「CCNA Interconnecting Cisco Networking Devices 1 (ICND1) (100-101日本語版)」
最近更新時間：2016-08-23
問題と解答：202

>> 100-101日本語模擬試験

 

試験番号：300-135参考書
試験科目：「Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)」
最近更新時間：2016-08-23
問題と解答：68

>> 300-135参考書

 

最もリラックスした状態ですべての苦難に直面しています。Ciscoの100-101日本語模擬試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。JapanCertのCiscoの100-101日本語模擬試験は私達を助けられます。JapanCertがそばにいてくれると、恐くなくなり、迷わなくなります。JapanCertのCiscoの100-101日本語模擬試験は私達受験生の最良の選択です。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/300-135.html

NO.1 A customer network engineer has made configuration changes that have resulted in some loss
of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the
problems.
Refer to the topology.
SW1 Switch Management IP address is not pingable from SW4. What could be the issue?
A. Management VLAN interface is shutdown on SW4
B. Management VLAN ip address on SW4 is configured in wrong subnet
C. Management VLAN not allowed in the trunk links between SW1 and SW4
D. Management VLAN not allowed in the trunk links between SW1 and SW2
E. Management VLAN not allowed in the trunk link between SW2 and SW4
Answer: B

300-135試験解答 300-135対応
Explanation:
In the network, VLAN 300 is called the Management VLAN. Based on the configurations shown below,
SW1 has VLAN 300 configured with the IP address of 192.168.10.1/24, while on SW4 VLAN 300 has an
IP address of 192.168.100.4/24, which is not in the same subnet.

NO.2 The implementations group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes
to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP
services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
On which device is the fault condition located?
A. DSW2
B. R3
C. R4
D. ASW1
E. R1
F. ASW2
G. DSW1
H. R2
Answer: C

300-135最新な問題集 300-135ソフト版
Explanation:
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem
lies on R4 & the problem is with DHCP

NO.3 The implementations group has been using the test bed to do a 'proof-of-concept' that requires
both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the
network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services,
and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the
209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?
A. Under the global configuration mode enter no vlan filter test1 vlan-list 10 command.
B. Under the global configuration mode enter no access-list 10 command.
C. Under the global configuration mode enter no access-map vlan 10 command.
D. Under the global configuration mode enter no vlan access-map test1 10 command.
Answer: D

300-135資格トレーニング

NO.4 The implementations group has been using the test bed to do a 'proof-of-concept' that requires
both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the
network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP
services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
On which device is the fault condition located?
A. DSW1
B. DSW2
C. R4
D. R3
E. ASW1
F. R2
G. R1
Answer: G

300-135試験 300-135答案
Explanation:
The BGP neighbor statement is wrong on R1.